1. THE WATERMAID
POWER SUPPLY.
The
WATERMAID Power
Pack converts the mains voltage (110VAC / 220VAC /
240VAC) to a Safe, Low, DC
Voltage (8 - 10 volts DC) that is supplied to the Electrolytic Cell.
The
WATERMAID Power
Supply has Easy-to-Read Chlorine control output
monitor and + and - adjustment Chlorine output
buttons.
All
WATERMAID Power
Supplies are manufactured with Self Cleaning Cell
Features as Standard.
2. THE WATERMAID
ELECTROLYTIC
CELL.
The
WATERMAID Cell is
supplied a Safe, Low, DC Voltage from the Power
Supply. As mild saline water pool water is passed
over the electrodes inside the cell, 100% Sodium
Hypochlorite (NaOCL, Liquid Chlorine) is produced
and dispersed into the flowing filtered water, back
to the pool or spa.
HOW
IT WORKS
The
WATERMAID, Salt
Water Chlorinator makes its own on-site chlorine for
swimming pools by converting mild saline pool water
(about 1/6th the concentration of seawater) into
chlorine.
The saline
water is electrolyzed as it passes through the
WATERMAID cell. As
this happens, 100% (NaOCl) Sodium Hypochlorite
(liquid chlorine) is produced for your swimming
pool.
Sodium
Hypochlorite is chlorine in a usable form which
purifies and sterilizes the water.
A
Typical Installation Diagram
The
WATERMAID's 30 Year
Proven Chlorination System destroys algae, viruses
and bacteria from your swimming pool. Every day of
the year your pool remains sparkling clean and
clear, for your family and friends to enjoy safe
swimming.
The
WATERMAID
Chlorination system, will drastically reduce
purchasing or adding sanitizing chemicals such as
liquid or granular chlorine. It will also minimize
the hazards of handling and storing of chlorine
chemicals.
Not only
will you have the peace of mind that the
WATERMAID
chlorination system is keeping your pool, clean,
clear, sparkling and sterile, but you will also
enjoy other benefits of swimming in mild salt water,
such as,
WATERMAID, salt
water chlorinators are capable of sanitizing all
sized pools. One single Watermaid unit is designed
for a swimming pool with a water volume up to
150,000 litres or 40,000 Gallons.*
The
WATERMAID unit
features advanced circuitry that allows the unit to
be adjusted and controlled so that you may set the
desired rate of chlorine output to suit your pool,
thus extending the life of the cell.
You may
either set the chlorine control dial to meet the
chlorine requirements of your pool and its
conditions or adjust the chlorine output to 100% to
super-chlorinate!
*
local climatic conditions and chlorine demands of
individual pools may vary this figure
